Topilene F501N is a polypropylene homopolymer used for extrusion and thermoforming applications like monofilaments, ropes and tapes. It is formulated with a low water-carry-over additive package.
TOPILENE PP F501N
Request for Quotation
Min (1 BAG)
TOPILENE PP F501N
Request for Quotation
Min (1 BAG)
Per Standard Bag = 25KG
Per Standard Pallet = 35 BAG
Terms and Conditions:
1. The principle of “while stocks last” will be applied.
2. All purchases made are non-refundable.
3. Orders weighing below 1,000kgs are strictly for own collection from the seller’s warehouse.
4. Free delivery is exclusively offered within West Malaysia for orders meeting the MOQ.
5. Additional charges may be applicable for Kelantan, Terengganu, and Pahang.
Shipping States: Perlis (Malaysia), Kedah (Malaysia), Perak (Malaysia), Penang (Pulau Pinang) (Malaysia), Johor (Malaysia), Negeri Sembilan (Malaysia), Malacca (Melaka) (Malaysia), Putrajaya (Malaysia), Kuala Lumpur (Malaysia), Selangor (Malaysia)
| Typical Application | Raffia, Rope, Fishing net, Staple fiber, Flat yarns for woven bags |
|---|---|
| Features | Low water carry over, Stretchability, Bisphenol free |
| Melt Index (230°C, 2.16kg) | 3.7 g/10min (ASTM D1238) |
| Density | 0.9 g/cm³ (ASTM D792) |
| Tensile Strength at Yield | 370 kg/cm² (ASTM D638) |
| Flexural Modulus | 17000 kg/cm² (ASTM D790) |
| Notched Izod Impact Strength (23°C) | 4.0 kg·cm/cm (ASTM D256) |
| Rockwell Hardness | 105 R-scale (ASTM D756) |
| Vicat Softening point (1kgf) | 155°C (ASTM D1525) |
| Heat Deflection Temperature (4.6kgf/cm²) | 110°C (ASTM D648) |
| Considerations | Due to variations in screw design and heat efficiency according to types of facilities, optimal conditions for each facility may differ. Therefore, the optimal temperature conditions for each facility must be taken into consideration depending on extruding pressure, cooling efficiency, changes in MI of the final product, appearances of the final product, etc. |
| Health, Safety and Food Contact Regulations | Topilene F501N complies with FDA requirements in the code of Federal Regulations in 21 CFR 177. 1520 for food contact. |
| Storage and Handling | This product should be stored in dry condition at temperature below 40°C and protected from UV light. When condensation is visible or can be expected, pre drying is recommended. (Drying condition: 80~100°C/2~4hours at air circulated condition) |
-
New
Lotte HDPE HF7000 TITANZEX
Request for QuotationMin (55 Bag)RFQ -
New
Lotte PP PM655 HOMO TITANPRO
Request for QuotationMin (50 Bag)RFQ -
New
Lotte PP SM461 COPO TITANPRO
Request for QuotationMin (50 Bag)RFQ -
New
Lotte HDPE HF0961 TITANEX
Request for QuotationMin (50 Bag)RFQ -
New
Lotte PP SM950 COPO TITANPRO
Request for QuotationMin (50 Bag)RFQ -
New
Lotte PP PD859 HOMO TITANPRO
Request for QuotationMin (50 Bag)RFQ
Details
Plastic Number: 5Raw Material: Vietnam
What others are saying
There are no contributions yet.