Topilene J1105T is a high flow homopolymer with a modified molecular weight. It has been formulated for use in thin walled packaging containers. Flow properties, nucleation and excellent stiffness give potential for cycle time reduction.
TOPILENE PP J1105T
Request for Quotation
Min (1 BAG)
TOPILENE PP J1105T
Request for Quotation
Min (1 BAG)
Per Standard Bag = 25KG
Per Standard Pallet = 35 BAG
Terms and Conditions:
1. The principle of “while stocks last” will be applied.
2. All purchases made are non-refundable.
3. Orders weighing below 1,000kgs are strictly for own collection from the seller’s warehouse.
4. Free delivery is exclusively offered within West Malaysia for orders meeting the MOQ.
5. Additional charges may be applicable for Kelantan, Terengganu, and Pahang.
Shipping States: Perlis (Malaysia), Kedah (Malaysia), Perak (Malaysia), Penang (Pulau Pinang) (Malaysia), Johor (Malaysia), Negeri Sembilan (Malaysia), Malacca (Melaka) (Malaysia), Putrajaya (Malaysia), Kuala Lumpur (Malaysia), Selangor (Malaysia)
| Typical Application | Containers, TWIM Food Containers |
|---|---|
| Features | Fast cycle (Production), Good moldability, High flowability |
| Melt Index (230°C, 2.16kg) | 60 g/10min (ASTM D1238) |
| Density | 0.9 g/cm³ (ASTM D792) |
| Tensile Strength at Yield | 380 kg/cm² (ASTM D638) |
| Flexural Modulus | 18000 kg/cm² (ASTM D790) |
| Notched Izod Impact Strength (23°C) | 3.0 kg·cm/cm (ASTM D256) |
| Rockwell Hardness | 108 R-scale (ASTM D756) |
| Vicat Softening point (1kgf) | 155°C (ASTM D1525) |
| Heat Deflection Temperature (4.6kgf/cm²) | 120°C (ASTM D648) |
| Considerations | Due to variations in screw design and heat efficiency according to types of facilities, optimal conditions for each facility may differ. Therefore, the optimal temperature conditions for each facility must be taken into consideration depending on extruding pressure, cooling efficiency, changes in MI of the final product, appearances of the final product, etc. |
| Health, Safety and Food Contact Regulations | Topilene J1105T complies with FDA requirements in the code of Federal Regulations in 21 CFR 177. 1520 for food contact and European Commission Regulation (EU) No 10/2011 and its amendment (EU) No 2016 / 1416 with regard to plastic materials and articles intended to come into contact with food. |
| Storage and Handling | This product should be stored in dry condition at temperature below 4 0°C and protected from UV light. When condensation is visible or can be expected, pre drying is recommended. (Drying condition: 80~100°C/2~4hours at air circulated condition) |
-
New
Lotte PP SM128 COPO TITANPRO
Request for QuotationMin (50 Bag)RFQ -
New
Lotte HDPE HF0961 TITANEX
Request for QuotationMin (50 Bag)RFQ -
Lotte HDPE HD5740UA TITANVENE
Request for Quotation RFQ -
New
Lotte HDPE HF1881 TITANEX
Request for QuotationMin (55 Bag)RFQ -
GP2500A(W)KA20B
RM212.50 -
New
Lotte PP 6431 HOMO TITANPRO
Request for QuotationMin (50 Bag)RFQ
Details
Plastic Number: 5Raw Material: Vietnam
What others are saying
There are no contributions yet.